The Z-60/65 series flowmeter is a variable area instrument. There is a conical body in the floating piston, which is a conical mouth with the body. When the fluid passes through the flowmeter, a pressure difference is formed at both ends of the sharp edge hole, so that the float moves towards the direction of the compression spring. The displacement of the float is directly proportional to the flow rate (flow rate). The flowmeter can be used in any azimuth and even inversion. The red indicator on the floating ring observation, can be measured by the flow indicator. The flowmeter can be installed at any position without affecting the accuracy. It can be installed on a horizontal or vertical line, and the flowmeter is used to monitor a variety of liquids.
temprature: 0~50℃
accuracy: ± 6%

pressure: ≤0.8MPa

● Ordering Information

Z-60 flow meter

Z-65 flow     

It can be installed horizontally or vertically.